灰浆输送泵30立方天镇定制发货
| 产品参数 | |
|---|---|
| 产品价格 | 电议 |
| 发货期限 | 电议 |
| 供货总量 | 电议 |
| 运费说明 | 电议 |
| 规格型号 | YXRG-15 (200) |
| 流量 | 2~85立方/小时 |
| 功率 | 1.5~35kw |
| 压力 | 1Mpa~2Mpa |
| 重量 | 60~2000kg |
| 水平输送能力 | 100m |
| 垂直输送 | 3~15m |
| 软管泵吸程 | 8m |
| 软管尺寸 | 按规格定制 |
| 设备类型 | 小型软管泵 |
| 设备用途 | 工业软管泵、输送软管泵 |
| 工作原理 | 滚轴挤压式循环往复 |
| 参考价格 | 5000~85000 |
| 耐腐蚀性输送性能 | 可输送 |
| 食品果酱输送性能 | 可升级为不锈钢型软管泵,食品级软管 |
| 其他行业应用 | 根据输送物质类型,定制设计加工 |
| 交货周期 | 小型软管泵现货,大型定制 |
| 付款方式 | 预付30%,剩余货到付清 |
| 范围 | 灰浆输送泵30立方天镇定制发货供应范围覆盖山西省、太原市、大同市、长治市、晋城市、阳泉市、朔州市、晋中市、运城市、忻州市、临汾市、吕梁市 矿区、南郊区、新荣区、阳高县、天镇县、广灵县、灵丘县、浑源县、左云县等区域。 |
豫信致诚机械设备(大同市分公司)坚持以市场为核心,以诚信为根本,使公司 滑模机产品的市场占有率逐步提高,我们将本着“以质量求生存,以创新求发展”的市场方针,竭诚欢迎各兄弟单位、同界同仁、莅临参观考察、洽谈合作,共创美好未来!


泵的叶轮与传动齿轮分开,且在泵腔内各零配件之间保证一定的间隙,相互不接触,无磨损,低噪音,可靠性好,使用寿命长,节能降耗。<br />
配置变频器后,可以随意调节流量,并可做一般计量泵使用。






工业软管泵不锈钢齿轮泵,可输送非润滑油饮料低腐蚀性液体,配铜齿轮可输送汽油苯等低内点液体。由于齿轮泵自吸能力差,一般是由于齿轮泵泵腔间隙较大所致。同时也是如果齿轮泵输出端没有“止回阀”,则必须是下一级齿轮泵的止回阀或控制阀。移动固定后,周围工作人员可恢复手术。
Industrial hose pump stainless steel gear pump, can transport non-lubricant beverages with low corrosive liquids, with copper gears can transport gasoline, benzene and other low internal point liquids. Due to the poor self-priming ability of the gear pump, it is generally caused by the large gap between the pump cavity of the gear pump. At the same time, if there is no "check valve" at the output of the gear pump, it must be a check valve or control valve of the next gear pump. After moving and fixing, the surrounding staff can resume surgery.



软管泵属于蠕动泵的范畴,主要是由一根特制的橡胶软管,对应泵体内转子总成上的一对压辊,当压辊沿着橡胶软管转动时,压辊与泵壳产生的挤压力将橡胶软管压扁,在软管自身弹性和侧导辊的强制下,通过恢复原状产生的真空吸入流体物料,物料在压辊的机械挤压下从管内排出,如此往复循环,从而达到连续输出物料的目的。
The hose pump belongs to the category of peristaltic pump. It is mainly composed of a special rubber hose corresponding to a pair of pressure rollers on the rotor assembly in the pump body. When the pressure roller rotates along the rubber hose, the pressure roller and the pump housing The squeezing force flattens the rubber hose. Under the elasticity of the hose itself and the force of the side guide rollers, the fluid material is sucked in by the vacuum generated by the original state. The material is discharged from the tube under the mechanical pressure of the pressure roller, and so on. , So as to achieve the purpose of continuous output of materials.
- 不锈钢防撞护栏供应 2026-03-03
- 出售45#精密光亮管现货供应 2026-03-03
- 山东Q345B热轧方管价格低定制生产 2026-03-03
- 挤压泵矿山现场浆料输送 2026-03-03
- 五层双面档案架哪里买 2026-03-03
- 档案室三化一体密集柜系列 2026-03-03
- 烙馍机工艺研发 2026-03-03
- b1级橡塑管价格 2026-03-03
- 桥梁栏杆厂家防撞钢护栏厂家价格公道 2026-03-03
- 新荣区热镀锌槽钢25#B槽钢厂家 2026-03-03
- 彩铝金属落水管 2026-03-03
- 厚壁无缝管定制切割 2026-03-03
- 彩铝檐沟供应彩铝檐沟 2026-03-03
- 井盖不锈钢格栅客户信赖的厂家 2026-03-03
- 空心漂珠定制 2026-03-03
